Vibrating Screen selection is based on the following factors:

• The maximum tons per hour
• A gradation of the feed material
• The type and weight of material
• The desired size of separation
• Any surface moisture on the material
• Any special operation requirements, including physical characteristics of the feed or product requirements

Inclined Screens are the most popular for aggregate applications. They are installed on an incline (anywhere from 5-45 degrees depending on the type of screen and the required cut) and employ the use of gravity to propel material down the screen. Since gravity helps to move the material, this type of screen requires low energy and low stroke.

The motor makes the exciter rotating speedily through the V-belt. Besides, the great centrifugal force produced by rotating eccentric block makes the sieve box do circular motion of some amplitude, together with the impulse transmitted through sieve box on the slope surface, which makes the materials on the screen surface successively tossed forward. Thus the classification is achieved in the process of thrown-up as materials with smaller size than the mesh is falling through.

Inclined vibrating screen should be started with empty load. Material is loaded after the machine works smoothly. Before stopping, the materials shall be totally discharged.Please observe the running state of screens constantly during the operation. If there is any unusual condition, should repair the breakdown.